玻璃门维修方法：看、听、摸、测

玻璃门作为门这一大类中，使用场所多，安装数量多。也就导致很多客户朋友们在日常使用玻璃门时经常会遇到各种各样的故障。那么作为一家玻璃门维修公司小编，在日常对玻璃门维修时会用到哪些方法呢？济南电动卷帘门安装维修小编就通过本文给大家介绍一下玻璃门中的维修方法步骤。

Glass doors, as a major category of doors, are widely used and have a large number of installations. This has led to many customers often encountering various malfunctions when using glass doors in their daily lives. So, as the editor of a glass door maintenance company, what methods are used in daily glass door maintenance? The installation and maintenance of Jinan electric Roller shutter will introduce the maintenance methods and steps in the glass door through this article.

一看

Take a look

即查看

View Now

是否有配件受损

Are there any damaged accessories

如配件断裂、发黑发黄、引脚相碰、器件松动、连线错误等。某些接触不良故障，尤其是在电源通电后，因故障点接触不良而产生火花。所以就认真看的相关配件有无出现损坏。

Such as broken accessories, black and yellow hair, pin collisions, loose components, incorrect wiring, etc. Some poor contact faults, especially sparks generated due to poor contact at the fault point after power is applied. So I carefully checked if there was any damage to the relevant accessories.

二听

Second Listening

即听运行的声音

Listen to the sound of operation immediately

检查是否有配件受损

Check if any accessories are damaged

在控制系统中，大都采用了电磁继电器作为控制器件，在继电器触点切换时会产生清晰的“滴哒”声。如无声或异常，在确定继电器驱动电器无故障后，可判定该继电器不良。如果有摩擦声检查轨道、吊轮、门扇等部分，查看这些部分配件的磨损情况。磨损严重会产生摩擦声应及时更换维修相关配件。

In control systems, electromagnetic relays are mostly used as control devices, which produce a clear "clicking" sound when the relay contacts switch. If there is no sound or abnormality, it can be determined that the relay is faulty after confirming that there is no fault in the relay driving device. If there is friction sound, check the track, lifting wheel, door leaf, and other parts to see if they are worn. Severe wear and tear can cause friction noise, and relevant accessories should be replaced and repaired in a timely manner.

三摸

Three touch

即触摸配件

I.e. touch accessories

检查是否有配件受损

Check if any accessories are damaged

在的维修过程中，也经常在通电后用手摸某些配件。如稳压IC等集成器件、防雷管、变压器、驱动二极管等等。以便感觉其温度是否正常，如发热快、温度高、电路无短路故障则可断定器件不良。

During the maintenance process, it is also common to touch certain accessories with your hands after power is applied. Integrated devices such as voltage stabilizing ICs, lightning protection tubes, transformers, drive diodes, etc. In order to feel whether the temperature is normal, if the heating is fast, the temperature is high, and there is no short circuit fault in the circuit, it can be determined that the device is defective.

四测

Four measurements

即测量控制电路

I.e. measurement control circuit

检查是否有配件受损

Check if any accessories are damaged

通常采用的方式有测电压、测电路的电阻、测电流等。这是一种综合性逻辑分析手段,可依据各种测量的数据准确地找出故障原因及损坏器件。

The commonly used methods include voltage measurement, circuit resistance measurement, current measurement, etc. This is a comprehensive logical analysis method that can accurately identify the cause of faults and damaged devices based on various measured data.

日常如上门维修时，除了询问客户在出现故障前后有哪些表现，还有就是要进行以下四个步骤了，就是看、听、摸、测。以上内容希望能够帮助到您，还有什么事项就来我们网站http://www.jnyuqilin.com咨询！

When conducting daily on-site maintenance, in addition to asking customers about their performance before and after a malfunction occurs, there are also four steps that need to be carried out: look, listen, touch, and test. I hope the above content can help you. If you have any further matters, please come to our website http://www.jnyuqilin.com consulting service