卷帘门遥控器如何进行配对?
在日常生活中,卷帘门随处可见,这就是问题所在。你知道如何配对卷帘门的遥控器吗?如果卷帘门的遥控器坏了怎么办?维修和检查方法是什么?接下来,本文章给大家做一个简单的介绍。
In daily life, roller shutter doors can be seen everywhere, which is the problem. Do you know how to pair the remote control of rolling shutter door? What if the remote control of the rolling shutter door breaks down? What are the maintenance and inspection methods? Next, this article gives you a brief introduction.
,应该知道遥控器的类型,如晶体频率和芯片类型。由于芯片不兼容,无法复制;然后,一只手握住原遥控器,另一只手复制遥控器,同时按下两个遥控器的开门键。如果遥控器指示灯快速闪烁,表示复印成功;,以相同的方式复制其他三个键。
First, you should know the type of remote control, such as crystal frequency and chip type. Unable to copy due to chip incompatibility; Then, hold the original remote control with one hand, copy the remote control with the other hand, and press the door open key of both remote controls at the same time. If the remote control indicator flashes quickly, it indicates that the copy is successful;, Copy the other three keys in the same way.
卷帘门遥控器坏了怎么办?
What if the remote control of the rolling shutter door is broken?
您可以通过对遥控器重新编码来修复遥控器。具体方法如下:
You can repair the remote control by recoding it. The specific methods are as follows:
1.,我们需要准备卷帘门控制器和遥控钥匙来纠正代码。
1. First, we need to prepare the rolling shutter door controller and remote key to correct the code.
2.然后,您需要拉动控制器侧面的锁扣,以打开控制器盖。
2. Then, you need to pull the latch on the side of the controller to open the controller cover.
![](/uploadfile/2021/0925/20210925022302246.jpg)
3.接下来,启动控制器内部的代码匹配开关。
3. Next, start the code matching switch inside the controller.
4.此时,您需要不断按下卷帘门遥控器上的向上滚动按钮。
4. At this time, you need to keep pressing the scroll up button on the remote control of the rolling shutter door.
5.当代码匹配灯闪烁时,按下遥控器上的向下滚动按钮,遥控器代码匹配成功。
5. When the code matching light flashes, press the scroll down button on the remote control, and the code matching of the remote control is successful.
修理和检查方法:
Repair and inspection methods:
(1),您需要仔细检查电机接收天线的细线是否如常说的那样伸出一半。
(1) First, you need to carefully check whether the thin wire of the motor receiving antenna extends half as usual.
(2)然后,根据电机程序中的命令信号,接收器并使用遥控代码。
(2) Then, according to the command signal in the motor program, clear the receiver and use the remote control code.
(3)如果这些方法无法,只能请维修人员进行维修。
(3) If these methods cannot be solved, only professional maintenance personnel can be invited for maintenance.
看完以上介绍,相信大家对济南卷帘门遥控器的配对有了进一步的了解。如需了解更多信息,请继续关注我们的网站,未来会有更多精彩内容呈现给您。
After reading the above introduction, I believe you have a further understanding of the matching of Jinan roller shutter door remote control. For more information, please continue to follow our website and more wonderful content will be presented to you in the future.