分享有效的养护卷帘门的方法
现在卷帘门的应用十分广泛,我们随处可见,当然价格也是不同的,那如何保养卷帘门才能提高使用寿命,
济南电动卷帘门安装维修厂家分享给你很好很有效的养护方法。
Now, rolling shutter doors are widely used, and we can see them everywhere. Of course, the prices are different. How to maintain rolling shutter doors can improve their service life. Jinan electric rolling shutter door installation and maintenance manufacturer will share with you very good and effective maintenance methods.
1.卷帘门安装位置的上端有可靠的防火设施,在卷帘门卷筒下端做包箱或吊顶时须设置可拆式活动盖板,在卷帘门弹簧下端预留500*500mm可拆检修孔,以便于日后的维修保养。
1. There are reliable fire prevention facilities at the upper end of the installation position of the roller shutter door. When the lower end of the roller shutter door is used as a box or ceiling, a removable movable cover plate must be set. A 500 * 500mm removable manhole is reserved at the lower end of the roller shutter door spring to facilitate future maintenance.
2.当卷帘门运行时发生较大抖动或异常声音时,应立即停机检查,排除有碍门帘正常启动的杂物。
2. In case of large shaking or abnormal sound during the operation of the roller shutter, the machine shall be stopped immediately for inspection, and the sundries that hinder the normal starting of the shutter shall be removed.
3.卷帘门的门帘和易生锈部位,要定期做防腐,油漆的保养处理,禁止用重物、硬物去撞击门面。
3. The curtain and rust prone parts of the rolling shutter door shall be regularly treated with anti-corrosion and paint maintenance. It is prohibited to use heavy and hard objects to hit the door surface.
4.卷帘门的底梁座上限位置要与轴承下端保持不小于200mm的距离,以确保制动停止时不发生冲顶现象。
4. The upper limit of the bottom beam seat of the roller shutter door shall be at least 200mm away from the lower end of the bearing to ensure that there is no jacking when the brake stops.
5.在卷帘门启闭停止过程中,应具备随位停止功能,不应当出现停止而继续下滑的现象,如果发生下滑距离大于50mm的现象,要立即对卷帘门的控制电器和制动机器进行检查维修,直到运行正常为止。
5. In the process of opening and closing the roller shutter door, it should have the function of stopping with the position, and should not stop and continue to slide. If the sliding distance is more than 50 mm, the control electrical appliances and braking machine of the roller shutter door should be checked and maintained immediately until the operation is normal.
6.卷帘门的运行,滑行,传动等部位要定期检查,每年至少3次,并根据机器需求及时加油,以确保卷帘门的正常运行。
6. The operation, sliding, transmission and other parts of the roller shutter shall be checked regularly at least three times a year, and oil shall be added timely according to the machine demand to ensure the normal operation of the roller shutter.
7.操作卷帘门时,操作者要站在能看到门帘运行状态的位置,否则卷帘门会受意外的发生而受损。
7. When operating the roller shutter door, the operator should stand at the position where he can see the running state of the shutter, otherwise the roller shutter door will be damaged by accident.
8.所有受电动控制的卷帘门,启闭运行方向须与开关箱指示相同,特别是在新接通电源试门或外来输入电源变换电线时,应先使用手动装置将门帘置于门洞高度的1/2的位置,接通电源后试操作卷门启闭,直到与指示相同方可正常使用。
8. For all roller shutter doors under electric control, the opening and closing operation direction must be the same as the indication of the switch box. Especially when the power test door is newly connected or the external input power is changed, the manual device shall be used to place the shutter at 1/2 of the height of the door opening. After the power is connected, the roller shutter shall be opened and closed for trial operation until it is the same as the indication.
9.禁止用带有酸、碱性溶液与卷帘门进行接触,以防止腐蚀门帘表面。
9. It is prohibited to contact the rolling shutter door with acid and alkaline solutions to prevent corrosion of the surface of the shutter.
The above are the maintenance methods arranged by the manufacturer for you. Pay attention to the above points in daily life. As long as the maintenance method is appropriate, the service life of the rolling shutter door can be greatly extended. More relevant content will come to our website http://www.jnyuqilin.com Consult!