电动卷帘门控制室因卷帘故障报警的解决
电动卷帘门控制室因卷帘故障报警的解决具体是怎样的呢?如果您想好好顺利的使用卷帘门,就需要对此问题进行解析,下面
济南电动卷帘门安装维修人员为您解答。
What is the solution to the alarm of electric rolling shutter control room due to rolling shutter failure? If you want to use the rolling shutter door well and smoothly, you need to analyze this problem. Now, Jinan electric rolling shutter door installation and maintenance personnel will answer this question for you.
解决方法:
resolvent:
1、检查卷帘控制箱是否故障报警。
1. Check whether the roller shutter control box gives a fault alarm.
2、如卷帘控制箱不报警,则检查消防信号线是否有问题。
2. If the roller shutter control box does not alarm, check whether there is a problem with the fire signal line.
在操作运用进程中,操作人员不得私自分开操作地址,应亲密留意启闭状况和执行状况,在启闭时卷帘下面禁绝有人站立、走动。在运用进程中一旦发现异常状况应立刻接纳紧要办法,割断输入电源,扫除毛病。卷帘门应树立按期保护准则,并做好每樘卷帘的保护记载任务,立案存档。长时间不启闭的卷帘半年必需保护一次,内容为消弭尘圾,涂刷油漆,对传动部份的链轮滚子链加光滑油生对等。
In the process of operation and application, the operator shall not separate the operation address without permission, but shall pay close attention to the opening and closing conditions and execution conditions. During opening and closing, no one is allowed to stand or walk under the roller shutter. In the process of application, once abnormal conditions are found, emergency measures should be taken immediately to cut off the input power supply and eliminate the problems. The rolling shutter door shall be protected on schedule, and the protection of each rolling shutter shall be recorded and filed. The roller shutters that have not been opened and closed for a long time must be protected once every six months. The contents are to eliminate dust, paint, and add smooth oil to the sprocket roller chain of the transmission part.
维护:
maintain:
(1)卷帘门的机械机构应每六个月保养一次,包括注油、润滑等,检查机械机构的磨损程度,是否有偏差。
(1) The mechanical mechanism of the roller shutter shall be maintained every six months, including oil injection, lubrication, etc., and the wear degree of the mechanical mechanism shall be checked for any deviation.
(2)每六个月检查一次导线的绝缘老化程度,测量绝缘电阻是否符合要求。
(2) Check the insulation aging degree of the conductor every six months, and measure whether the insulation resistance meets the requirements.
(3)电器部分常用的保险管、接触器等应有足够的储备,以便及时更换。
(3) The commonly used fuse tubes and contactors of electrical appliances should be reserved enough for timely replacement.
This is how to solve the alarm of electric rolling shutter control room due to rolling shutter failure. I hope it will be helpful to you. If you want to know more about rolling shutter doors, please come to our website http://www.jnyuqilin.com Come on!