卷帘门上下错门怎么解决？

一般来说,如果客户误按锁键,会导致屏幕上下错门。当发生这样的问题,如何解决?济南电动卷帘门安装维修人员认为远程控制的关键控制,远程控制键锁可以锁马达。在这一点上,树荫下的远程控制其他按钮将会失败,无法进行操作。此时,您可以按停止键解锁。一般来说,如果电机锁在异常情况下,可以采用以下解锁。

Generally speaking, if the customer presses the lock key by mistake, it will cause the wrong door on the screen. When such a problem occurs, how to solve it? Jinan electric roller shutter door installation and maintenance personnel believe that the key control of remote control is that the remote control key lock can lock the motor. At this point, other remote control buttons under the shade will fail and cannot be operated. At this time, you can press the Stop key to unlock. In general, if the motor lock is abnormal, the following unlocking methods can be used.

打开卷帘门顶部的通道,然后慢慢把链。通道的位置通常是在右上角。简单的方法是关闭电源。上电时,遥控锁会电动释放。

Open the channel at the top of the roller shutter door, and then slowly put the chain. The position of the channel is usually in the upper right corner. The simple way is to turn off the power. When powered on, the remote control lock will be released electrically.

此外如果您的卷帘门出现门拉不下来的情况，不要着急，可以这样检查：

In addition, if your roller shutter door cannot be pulled down, don't worry. You can check as follows:

1、先检查卷帘门两边的滑槽是否有坏损，然后拉一下门，看是不是门的方向偏了。

1. First check whether the chute on both sides of the roller shutter door is damaged, and then pull the door to see if the direction of the door is wrong.

2、如果滑槽或者藏在滑槽内门边没有坏的话，可以在滑槽内使用黄油或润滑油，减小摩擦。

2. If the chute or the door hidden in the chute is not damaged, you can use butter or lubricating oil in the chute to reduce friction.

3、如果是卷帘门方向偏了，则很可能是卷帘门上面的弹簧坏了，建议找专门的人员维修。

3. If the direction of the roller shutter door is off, it is likely that the spring on the roller shutter door is broken. It is recommended to find special personnel to repair it.

现在的电动卷帘门都带断电手动释放系统，在断电的情况下可通过手动摇杆使卷帘门升降。如果停电的时，自己刚好在卷帘门里面，不要恐慌，可以用旁边的配机铁链将门拉起。想要保证电动卷帘门在停电时依然能够电动操作，则可以为卷帘门加装不间断电源，这样就不怕它突然没电。更多相关事项就来我们网站http://www.jnyuqilin.com咨询吧！

The current electric roller shutter door is equipped with a power-off manual release system. In case of power failure, the roller shutter door can be lifted and lowered by the manual rocker. If you happen to be inside the rolling shutter door when the power is cut off, don't panic. You can pull the door up with the nearby machine iron chain. If you want to ensure that the electric shutter door can still be operated electrically in case of power failure, you can install an uninterruptible power supply for the shutter door, so that it is not afraid of sudden power failure. Come to our website for more relevant matters http://www.jnyuqilin.com Ask!