不锈钢卷帘门一次挤压成形的过程事项

不锈钢卷帘门其实大家都不会陌生，在街上到处都可以看见，一般在街上的门面上就是安装的这种不锈钢卷帘门。这种门安装比较简单，时间快所以很多业主都会选择这种门，下面济南电动卷帘门安装维修人员来讲讲不锈钢卷帘门一次挤压成形的过程，需要注意以下事项：

Stainless steel rolling shutter doors are actually familiar to everyone, and can be seen everywhere on the street. Generally, this type of stainless steel rolling shutter door is installed on the facade of the street. This type of door is relatively simple to install and takes a long time, so many owners choose this type of door. Below, the installation and maintenance personnel for Jinan electric rolling shutter doors will explain the process of one-time extrusion forming of stainless steel rolling shutter doors. The following precautions need to be noted:

1.材料质量：要保证所选用的不锈钢板材质量良好，表面光滑无划痕，无明显的钢板厚薄差异。

1. Material quality: It is necessary to ensure that the selected stainless steel plate has good quality, smooth surface without scratches, and no obvious differences in steel plate thickness.

2.模具设计：要选用合适的模具，且设计合理。模具应考虑到钢板的变形情况，不能出现过于复杂的几何形状，避免出现拉伸变形等问题。

2. Mold design: Suitable molds should be selected and designed reasonably. The mold should consider the deformation of the steel plate and avoid overly complex geometric shapes to avoid problems such as tensile deformation.

3.环境条件：挤压成形时需要控制好环境条件，避免温度过高或过低，以及空气中湿度过大等情况对挤压成形的影响。

3. Environmental conditions: During extrusion forming, it is necessary to control the environmental conditions well to avoid the impact of high or low temperature, as well as high humidity in the air on the extrusion forming.

4.润滑剂：在挤压成形过程中需要涂抹润滑剂，以降低表面摩擦，减少不锈钢板材变形，达到更好的挤压效果。

4. Lubricant: During the extrusion forming process, lubricant needs to be applied to reduce surface friction, reduce deformation of stainless steel plates, and achieve better extrusion results.

5.操作技巧：挤压成形时需要控制好加压力度和速度，以及板材的位置，避免出现偏移或变形等问题。

5. Operating skills: During extrusion forming, it is necessary to control the pressure and speed, as well as the position of the sheet, to avoid problems such as deviation or deformation.

6.质量检验：挤压成形后需要对成品进行质量检验，检测尺寸、平直度、表面质量等指标，以保证产品质量。

6. Quality inspection: After extrusion forming, it is necessary to conduct quality inspection on the finished product, testing dimensions, flatness, surface quality and other indicators to ensure product quality.

总之，要保证不锈钢卷帘门一次挤压成形的过程顺利进行，需要严格按照上述事项进行操作，确保产品质量达到要求。更多事项就来我们网站http://www.jnyuqilin.com咨询！

In short, to ensure the smooth extrusion process of stainless steel rolling shutter doors, it is necessary to strictly follow the above procedures to ensure that the product quality meets the requirements. For more information, come to our website http://www.jnyuqilin.com consulting service