车库门的扭簧力度如何检测？

车库门的扭簧作用是平衡活动门板的重量，使得电动门能够平稳地工作。当车库门关闭时，扭簧会压缩以储存能量；当车库门打开时，扭簧的储能会被释放，帮助车库门打开。

The torsion spring function of Garage door is to balance the weight of the movable door panel, so that the electric door can work smoothly. When the Garage door is closed, the torsion spring will be compressed to store energy; When the Garage door is opened, the stored energy of the torsion spring will be released to help open the Garage door.

扭簧的储能大小和车库门的重量有关，如果车库门比较重，那么就需要多个扭簧一起加力，才能储存更多的能量打开车库门。一般来说，门洞宽度超过3.3米就需要用到双扭簧。

The energy storage of the torsion spring is related to the weight of the Garage door. If the Garage door is relatively heavy, it requires multiple torsion springs to apply force together to store more energy to open the Garage door. Generally speaking, double torsion springs are required when the width of the door opening exceeds 3.3 meters.

扭簧和钢绳相互配合，在电机的带动下，就可以轻松开启翻板门，这就是车主回到家以后无须下车手动开关门的原因。安装翻板门时，需要将活动门板连接到钢丝盘上，而钢丝绳则起着承重和拉紧的作用。

The torsion spring and steel rope cooperate with each other, and under the drive of the motor, the flap door can be easily opened, which is why the car owner does not need to manually open and close the door after getting off the car after returning home. When installing a flip door, it is necessary to connect the movable door panel to a steel wire reel, which serves as a load-bearing and tensioning device.

济南车库门安装维修人员提醒当活动门板开启时，扭簧受力带动钢丝盘转动；当关闭门扇时，弹簧复位，钢丝绳向外延伸。无论是开门状态还是关门状态，车库门上的钢丝绳都处于受力状态。所以钢丝绳一直都在产生拉力，将门扇拉紧。

The installation and maintenance personnel of Garage door in Jinan remind that when the movable door panel is opened, the torsion spring forces the steel wire disc to rotate; When closing the door leaf, the spring returns and the wire rope extends outward. The steel wire rope on the Garage door is under stress whether it is open or closed. So the steel wire rope is constantly generating tension, pulling the door leaf tight.

要检测车库门的扭簧力度是否合适，首先我们需要懂得扭簧的力度调节公式。

To test whether the torsional spring strength of the Garage door is appropriate, first we need to know the strength adjustment formula of the torsional spring.

扭簧安装需要用到撬棍、大力钳，扳手等工具，再根据开门高度+13的公式进行计算，比如说车库门的开门高度是2米，就需要将扭簧拧到20次+13次时，再来检验扭簧的力度，此时活动门板可以单手轻松托举，滑行顺畅表示力度合适。

The installation of the torsion spring requires the use of crowbars, locking pliers, wrenches and other tools, and then it is calculated according to the formula of the opening height+13. For example, if the opening height of the Garage door is 2 meters, it is necessary to tighten the torsion spring 20 times+13 times, and then check the strength of the torsion spring. At this time, the movable door panel can be easily lifted with one hand, and smooth sliding means that the strength is appropriate.

扭簧力度调节是电动门使用过程中一个非常重要的知识点，如果扭簧乏力，电机就带不动门板，门就无法正常打开。

The adjustment of torsion spring force is a very important knowledge point in the use of electric doors. If the torsion spring is weak, the motor cannot move the door panel, and the door cannot open normally.

此时可能出现钢丝绳松动，如果强行用电机开门，可能导致电机受损。当扭簧力度调好以后，即使在停电状态下，业主也可以轻松把活动门板抬起。还有什么问题可以随时来我们网站http://www.jnyuqilin.com咨询！

At this point, the steel wire rope may become loose. If the motor is forcibly used to open the door, it may cause damage to the motor. After adjusting the force of the torsion spring, even in a power outage state, the owner can easily lift the movable door panel. If you have any further questions, please feel free to come to our website http://www.jnyuqilin.com consulting service