电动卷帘门卷布质量如何判断查看

电动卷帘门通过传动装置和控制系统实现电动卷帘门的升降，起到防火和隔热的作用。电动卷帘门因其美观、刚性强等优点，深受市场消费者青睐，广泛应用于工业和民用建筑的防火隔断领域。你知道判断电动卷帘门卷布质量时应该注意什么吗?接下来，济南电动卷帘门安装维修厂家会带大家去下面了解一下。

The electric Roller shutter realizes the lifting of the electric Roller shutter through the transmission device and control system, playing the role of fire prevention and heat insulation. Electric Roller shutter is favored by market consumers because of its beauty, rigidity and other advantages, and is widely used in the field of fire partition of industrial and civil buildings. Do you know what should be paid attention to when judging the quality of rolling cloth of electric Roller shutter? Next, the installation and maintenance manufacturer of Jinan electric Roller shutter will take you to the following to understand.

电动卷帘门厂家建议大家从外观、颜色、缝制等方面进行介绍。不同部件的不同类型电动卷帘门所需的质量标准不同。详情如下：

The manufacturer of electric Roller shutter suggests that you introduce it from the aspects of appearance, color, sewing, etc. Different types of electric Roller shutter of different parts require different quality standards. The details are as follows:

1、外观

1. Appearance

济南电动卷帘门帘面表面应无撕裂、缺角、打补丁、破洞、倾斜、跳线、断线、经纬线密度明显不均匀等缺陷。整个帘面表面应美观、平直、整洁。帘面表面的所有部件应组装拼接，不得错位，所有紧固件应牢固无松动。

The surface of Jinan electric roller shutter shall be free of defects such as tearing, missing corners, patching, holes, inclination, jumper, broken wires, and obvious uneven Linear density of longitude and latitude. The entire curtain surface should be beautiful, straight, and neat. All components on the surface of the curtain should be assembled and spliced without misalignment, and all fasteners should be firm and not loose.

2、颜色

2. Color

对于同一产品和同一工程，好的电动卷帘门的防火帘面应无明显色差。

For the same product and project, the fire curtain surface of good electric Roller shutter shall be free of obvious color difference.

3、缝制

3. Sewing

电动卷帘门帘面的翘曲方向应为帘面的受力方向;帘面拼接缝的个数每米内各层累计不应超过3条，接缝应避免重叠;窗帘表面的受力缝应采用双线缝制，拼接缝的搭接量不小于20毫米;非受力缝可以用同一根线缝制，拼接缝的搭接量不应小于10毫米。

The warping direction of the curtain surface of the electric roller shutter shall be the force bearing direction of the curtain surface; The number of joint joints on the curtain surface should not exceed 3 in each layer per meter, and overlapping joints should be avoided; The stress seam on the surface of the curtain should be made with double stitches, and the overlap of the splicing seam should not be less than 20mm; Non stressed joints can be sewn with the same thread, and the overlap of the joint should not be less than 10mm.

在阅读了上述电动卷帘门厂家关于判断济南电动卷帘门卷布质量的介绍后，我相信大家对卷布的质量都有一定的了解。我希望这些内容对每个人都有帮助。更多详情，您可以关注网站趋势http://www.jnyuqilin.com，欢迎大家随时访问和购买。

After reading the introduction of the above electric Roller shutter manufacturer on judging the quality of the roll cloth of Jinan electric Roller shutter, I believe that everyone has a certain understanding of the quality of the roll cloth. I hope these contents are helpful to everyone. For more details, you can follow website trends http://www.jnyuqilin.com Welcome to visit and purchase anytime.