卷帘门帘板验收的标准介绍

来源：http://www.jnyuqilin.com/  发布时间：2024-06-18 19:14:22

一、对于工业快速门帘板相邻的互锁串联卡扣要转动灵活，在摆动幅度±900范围内禁止有脱落现象，对于具备防烟密封性能的重叠形帘板卡扣串接后，摆动幅度范围±900内同样不允许有脱落的现象。

1、 For the interlocking series buckles adjacent to industrial fast door curtain panels, they should rotate flexibly and must not fall off within a swing range of ± 900. For overlapping curtain panel buckles with smoke sealing performance, they should also not fall off within a swing range of ± 900.

二、对于工业卷帘门的门帘板验收，其门帘板必须要平直，并且笔直程度每米不能高于1.5毫米，全长的直线度不能超过0.12%。

2、 For the acceptance of door curtain panels for industrial roller shutter doors, the door curtain panels must be straight and the straightness cannot exceed 1.5 millimeters per meter, and the straightness of the total length must not exceed 0.12%.

三、门帘板的两侧挡板以及防窜装置必须装配牢固，装配成卷帘以后，门帘板的窜动旷量绝不能够高于2mm。

3、 The two side baffles and anti tampering devices of the door curtain panel must be firmly assembled. After being assembled into a rolling shutter, the tampering clearance of the door curtain panel must not exceed 2mm.

四、工业快速门帘板在装配好之后，绝不允许有任何缝隙以及空洞的存在。

4、 After assembly, there must be no gaps or voids in the industrial fast door curtain panels.

五、对于具备有防烟密封性能的门帘板，门体内外鼻钩窜接后的接触面成一定的弧面接触，弧面角度在300范围内。

5、 For door curtain panels with smoke proof sealing performance, the contact surface between the inner and outer nose hooks of the door body forms a certain arc contact, and the arc angle is within the range of 300.

六、在工业快速门的门帘板装配完成以后，运行过程中绝不允许有任何倾斜的情况存在，正常应是平行升降，门帘的凹凸不平直长度不能大于洞口高度的1/300。

6、 After the assembly of the door curtain panel for industrial express doors is completed, no tilting is allowed during operation. Normally, it should be parallel lifting, and the uneven length of the door curtain should not exceed 1/300 of the height of the opening.

本文由济南卷帘门友情奉献.更多有关的知识请点击:http://www.jnyuqilin.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is dedicated by Jinan Roller Shutter Door. For more information, please click: http://www.jnyuqilin.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned