需要正确调整电动卷帘门的高低位置
电动卷帘门的使用非常普遍,卷帘门不仅使用方便,而且安全性很高。那么,电动卷帘门怎么调高低呢?
济南电动卷帘门安装维修人员为您介绍一番内容。
The use of electric roller shutter door is very common. The roller shutter door is not only convenient to use, but also has high safety. Then, how to adjust the height of the electric roller shutter door? Jinan electric roller shutter door installation and maintenance personnel will introduce some contents to you.
1.手动电动卷帘门可借助卷帘门中心轴上的扭簧手动上下拉动卷帘门开关,以平衡受力,电动伸缩门主要由门体、驱动器和控制系统组成,卷帘门又称卷帘门,是由许多铰接的门片串联而成,在固定的滑道内,以门上方的卷轴为中心上下转动的门。
1. The manual electric roller shutter door can manually pull the roller shutter door switch up and down with the help of the torsion spring on the central shaft of the roller shutter door to balance the force. The electric telescopic door is mainly composed of the door body, driver and control system. The roller shutter door is also known as the roller shutter door, which is composed of many hinged door pieces in series. It is a door that rotates up and down with the roller above the door as the center in a fixed slide.
2.电动卷帘门使用专用电机驱动卷帘门中心轴旋转,到达卷帘门开关,旋转到电机设定的上下限时自动停止,电动卷闸门的电机是电机功率不足引起的,说明测量电流高于额定电流,需要更换大电机,散热条件不好,联轴器不同心。
2. The electric roller shutter door uses a special motor to drive the central shaft of the roller shutter door to rotate. When it reaches the roller shutter door switch and rotates to the upper and lower limits set by the motor, it will automatically stop. The motor of the electric roller shutter is caused by insufficient motor power, which indicates that the measured current is higher than the rated current. It needs to replace the large motor. The heat dissipation condition is poor and the coupling is not concentric.
3.门体造型新颖美观,灵活多变,结构紧凑,空间小,广泛应用于建筑内外门,为保证电动卷帘门与墙体形成一个整体,应做好密封,然后对洞口和墙体进行粉刷,上漆后,门缝应平整光滑,电动卷帘门应能自由轻开,不能过紧、过松、反弹。
3. The door body is novel and beautiful in shape, flexible and changeable, compact in structure and small in space. It is widely used in the internal and external doors of buildings. In order to ensure that the electric roller shutter door and the wall form a whole, it should be sealed, and then the opening and the wall should be painted. After painting, the door seam should be flat and smooth, and the electric roller shutter door should be able to open freely and gently without being too tight, too loose and rebound.
安装电动卷帘门后,可以通过上方电机处的限位器调节限位器上下调节高度。正确方式是首先用遥控器将卷闸门升高到合适的高度,然后找到调节上下高度的限位器,旋转调节固定螺丝调节卷闸门的高度,后拧紧固定螺丝,通过遥控器检查卷闸门的高度是否合适。
After the electric roller shutter door is installed, the height can be adjusted up and down by the stopper at the upper motor. The correct way is to first use the remote controller to raise the rolling gate to a proper height, then find the limiter for adjusting the upper and lower heights, rotate the adjusting fixed screw to adjust the height of the rolling gate, then tighten the set screw, and check whether the height of the rolling gate is appropriate through the remote controller.
The above is about how to adjust the height of the electric roller shutter door. I hope it will help you! When installing the electric roller shutter door, pay attention to the method, otherwise the use will be affected if the installation is not good. It is recommended to ask a professional master to install it. Follow us http://www.jnyuqilin.com Yes, I know more!