济南卷帘门：卷帘门限位器怎么调整？

来源：http://www.jnyuqilin.com/  发布时间：2024-11-16 13:04:58

　　卷帘门限位器的调整可以通过以下两种方法进行：

　　The adjustment of the roller shutter door limiter can be done through the following two methods:

　　通过调整间隔螺钉头的长短进行调整：

　　Adjust by adjusting the length of the interval screw head:

　　放下卷帘门，将门榫头拉到门缝旁边，将螺钉头调整到对应螺孔。

　　Lower the rolling shutter door, pull the tenon of the door to the side of the door gap, and adjust the screw head to the corresponding screw hole.

　　打开固定螺钉夹具，转动螺钉头，调整螺钉头的长短，使之达到限制门体门底碰触的效果。

　　Open the fixed screw fixture, rotate the screw head, adjust the length of the screw head to achieve the effect of limiting the contact between the door body and the bottom of the door.

　　重复上述操作，把螺钉头调整完毕，再用螺钉夹固定螺钉头，完成调整。

　　Repeat the above operation, adjust the screw head, and then fix the screw head with a screw clamp to complete the adjustment.

　　通过电机部位的限位调节杆进行调整：

　　Adjust through the limit adjustment rod on the motor part:

　　在卷帘门电机部位有两个内六角的插孔，用专用的限位调节杆或者较小的螺丝刀插入。

　　There are two hexagonal socket holes at the motor part of the rolling shutter door, which can be inserted with dedicated limit adjustment rods or smaller screwdrivers.

　　将卷帘门调节至最上，确定电机旋转方向，将调节杆插入箭头所指方向。

　　Adjust the rolling shutter door to the top, determine the direction of motor rotation, and insert the adjustment rod in the direction indicated by the arrow.

　　如果门卷至太多，则向减号方向旋转；如果不到位，则向加号方向旋转。向下调节则相反

　　If the door rolls too much, rotate in the direction of the minus sign; If it is not in place, rotate in the direction of the plus sign. Adjusting downwards is the opposite

　　本文由济南卷帘门提供帮助，更多的相关内容请点击：http://www.jnyuqilin.com希望本文能够为您带来帮助，感谢您的阅读！

　　This article is assisted by Jinan Rolling Shutter Doors. For more related content, please click: http://www.jnyuqilin.com I hope this article can be helpful to you. Thank you for reading!