电动卷帘门的日常应急处理措施

在门的使用过程中，总会不可避免地出现一些这样或那样的小故障影响着门的运行，这时找电动卷帘门厂家来处理，时间上来不及，因此掌握一些必要应急处理措施十分重要。下面济南电动卷帘门安装维修人员为您讲解相关措施方法吧。

During the use of the door, some small faults of one kind or another will inevitably occur, which will affect the operation of the door. At this time, the manufacturer of electric rolling shutter door will be asked to deal with it. It is too late, so it is very important to master some necessary emergency treatment measures. Now the installation and maintenance personnel of Jinan electric roller shutter door will explain the relevant measures and methods for you.

误按下电动卷帘门的紧急停止按钮，导致门体既不能升又不能降，遇到这一情况时，该如何处理呢？其实很简单，再次按下急停按钮，将其旋转复位，电动卷帘门即可恢复正常的上升、下降运行。

The emergency stop button of the electric roller shutter door is pressed by mistake, which results in the door body can neither be raised nor lowered. What should be done in this case? In fact, it is very simple. Press the emergency stop button again, rotate it to reset, and the electric roller shutter can resume normal ascending and descending operation.

在门向下关闭运行时，红外安全线出现了偏离，这时红外安全线的遇阻反弹功能必将大受影响，通行人员、车辆的安全将无法保障。

When the door is closed downward, the infrared safety line deviates. At this time, the rebound function of the infrared safety line will be greatly affected, and the safety of pedestrians and vehicles will not be guaranteed.

大家都知道，红外对射装置大多安装在高速门的轨道下端，如果红外线 出现偏离，须立即调整两侧红外探头的方向，使其对射，两侧的红外光束连成一条直线，这样才不会出现偏离。

As we all know, most of the infrared aiming devices are installed at the lower end of the high-speed door track. If the infrared ray deviates, the direction of the infrared probes on both sides must be adjusted immediately to make them aim and the infrared beams on both sides connect in a straight line, so that the deviation will not occur.

如果在使用过程中，发现高速门出现限位不准或失灵情况，怎么办呢？不要着急，冷静下来，仔细检查门编码器的端头部分，看其是否出现脱落，有的话，需要在编码器的端头添加上一块垫片，这样端头与编码器之间就不会再出现脱落了。

What if the high-speed door is found to have inaccurate limit or failure during use? Don't worry. Calm down and carefully check the end of the door encoder to see if it falls off. If so, add a gasket to the end of the encoder, so that the end will not fall off from the encoder again.

当电动卷帘门使用中出现这样或那样的小故障时，大家不要急，一定要冷静下，慢慢分析、检查可能发生问题的原因，一一排除，若实在处理不了，立即联系厂家技术人员，要求其派人上门处理。更多相关事项就来我们网站http://www.jnyuqilin.com咨询吧！

When this or that kind of small fault occurs in the use of the electric roller shutter door, everyone should not be anxious. We must calm down, slowly analyze and check the causes of the possible problems, and eliminate them one by one. If it is really impossible to solve it, immediately contact the manufacturer's technical personnel, and ask them to send someone to handle it. Come to our website for more information http://www.jnyuqilin.com Consult!