电动卷帘门维修时要多去注意相关事项

在对济南电动卷帘门安装维修时有一些需要注意的事项，在卷帘门维系过程中操作人员不能擅自的离开操作点，应密切注意卷帘门的启闭情况和执行情况，对卷帘门维修时千万不能有人站立或是在门下走动，以防卷帘门行程开关失灵，发生事故。检查电器线路和电器设备是否损坏，如果遭到损坏要及时维修，以免出现不必要的麻烦。

There are some matters needing attention during the installation and maintenance of Jinan electric roller shutter door. During the maintenance of roller shutter door, the operator shall not leave the operating point without authorization, but shall pay close attention to the opening and closing conditions and execution of roller shutter door. During the maintenance of roller shutter door, no one shall stand or walk under the door, to prevent the failure of roller shutter door travel switch and accidents. Check whether the electrical circuit and electrical equipment are damaged. If they are damaged, repair them in time to avoid unnecessary trouble.

在进行卷帘门维修中应注意检查其电源和防火控制箱，如出现损坏可重新设置或更换。当卷帘门出现关不严或是开不完全的情况时，可以重新调整卷帘门的行程位置然后检查其门体是否正常。让卷帘门体单向运行，从而检查其行程开关及行程开关接线。

The power supply and fire control box shall be checked during the maintenance of rolling shutter door, and it can be reset or replaced in case of damage. When the roller shutter door is not closed tightly or opened completely, you can readjust the travel position of the roller shutter door and check whether the door body is normal. Check the travel switch and the wiring of the travel switch by allowing the roller shutter door to run in one direction.

如果卷帘门电机正常动作，但门体不运行，主要的问题应该是帘片脱扣、卡死等原因，在对卷帘门维修时可以坚固五金件和调节帘片位置，如遇卷帘门体未关紧就自动反向关门或是开门，可以在卷帘门维修时增加其负载力。

If the motor of the roller shutter operates normally, but the door body does not operate, the main problem should be that the shutter is tripped, jammed, etc. During the maintenance of the roller shutter door, the hardware can be strengthened and the position of the shutter can be adjusted. If the roller shutter door body is not closed tightly, it will automatically reverse the door closing or open the door, and its load can be increased during the maintenance of the roller shutter door.

此外虽然现在科技不断的发展，但由于时间问题，手动卷帘门还是具有一定市场，手动卷帘门维修方法有，当出现卷帘门折断或是弹簧连接带断裂，在进行维修时可以更换弹簧吊带。

In addition, despite the continuous development of science and technology, there is still a certain market for manual roller shutter doors due to time problems. There are maintenance methods for manual roller shutter doors. When the roller shutter door breaks or the spring connecting belt breaks, the spring sling can be replaced during maintenance.

手动卷帘门常出现的一个问题就是门锁打不开或是钥匙插不进去，可以将门锁进行更换，如果卷帘门可以正常卷上去，在卷帘门维修不用考虑卷帘门的弹簧损坏与否，这种情况一般都是卷帘门上的帘片卡子卡住导槽或是帘片变形所致，可以针对卷帘门入导槽的槽口处进行维修。

A common problem with manual rolling shutter doors is that the door lock cannot be opened or the key cannot be inserted, so the door lock can be replaced. If the rolling shutter door can be rolled up normally, it is not necessary to consider whether the spring of the rolling shutter door is damaged during the maintenance of the rolling shutter door. This situation is generally caused by the clip of the shutter on the rolling shutter door jamming the guide slot or the deformation of the shutter. The maintenance can be carried out for the slot where the rolling shutter door enters the guide slot.

另外，卷帘门维修保养一般来说就是生产商维修，还有一些是专门负责维修的公司，我们可以在市面上找到。如果自己所在的城市较少卷帘门维修公司，那我们就应该在购入时与商家谈好维修卷帘门事宜，签订好保修协议，索取联系电话，日后联系，自己来操作维修的话，还是有一定难度的。关注我们http://www.jnyuqilin.com，了解更多事项！

In addition, the maintenance of roller shutter doors is generally the manufacturer's maintenance, and there are some companies that are specially responsible for maintenance, which we can find on the market. If there are few roller shutter door maintenance companies in the city where we live, we should negotiate with the merchants about the maintenance of roller shutter doors, sign a warranty agreement, ask for the contact number, and contact them in the future. It is still difficult to operate the maintenance yourself. Follow us http://www.jnyuqilin.com , learn more!