不锈钢卷帘门的底边安全柔软测试步骤

不锈钢卷帘门经常应用在很多的工厂车间里面，因为不锈钢卷帘门具有开启便捷、保温、保冷、防虫、防风、防尘、隔音、防火、防异味、采光等众多优点。不锈钢卷帘门需要方便人们或者车辆进进出出的，所以非常需要确保不锈钢卷帘门的安全性能，不锈钢卷帘门的底边安全柔软，当不锈钢卷帘门的安全底边安装完需要对其功能进行测试验收，告诉大家需要注意这些步骤：

Stainless steel rolling shutter doors are often used in many factory workshops, because stainless steel rolling shutter doors have many advantages, such as convenient opening, heat preservation, cold insulation, insect prevention, wind prevention, dust prevention, sound insulation, fire prevention, odor prevention, lighting and so on. The stainless steel roller shutter door needs to be convenient for people or vehicles to enter and leave, so it is very necessary to ensure the safety performance of the stainless steel roller shutter door. The bottom edge of the stainless steel roller shutter door is safe and soft. When the safety bottom edge of the stainless steel roller shutter door is installed, its function needs to be tested and accepted. We tell you that you need to pay attention to these steps:

一、先将不锈钢卷帘门的急停键关闭，开启不锈钢卷帘门电控箱电源，按压一次底边接收器面板学习键，检查信号接收器灯亮。

1、 First, close the emergency stop key of the stainless steel rolling shutter door, turn on the power supply of the electric cabinet of the stainless steel rolling shutter door, press the learning key on the bottom receiver panel once, and check that the signal receiver light is on.

二、按压几次快速门的安全底边布兜内压力胶管，信号指示灯出现闪烁表示接收成功，重复按压底边压力胶管，每压一次接收器灯亮测试信号连接完成。

2、 Press the pressure hose in the safety bottom cloth pocket of the fast door several times, and the signal indicator flashes to indicate that the reception is successful. Press the bottom pressure hose repeatedly, and the receiver light turns on every time to test that the signal connection is completed.

三、打开不锈钢卷帘门的电控箱急停键，按压底边布兜内的压力胶管，那么不锈钢卷帘门的门体接到信号会自动上升，正常运转门体。

3、 Open the emergency stop key of the electric control box of the stainless steel roller shutter door, press the pressure hose in the bottom cloth pocket, then the door body of the stainless steel roller shutter door will rise automatically after receiving the signal, and the door body will operate normally.

四、济南电动卷帘门安装维修人员认为那么在测试不锈钢卷帘门安全底边和使用快速门过程中，如果发现电控箱无法接收到安全底边信号时，需要注意检查安全底边发射器内电池和底边压力胶管，如果发现电池耗尽就要更换新电池。如果底边压力胶管破损、漏气，破损漏气的要进行密封处理，必要时要更换新的安全底边压力胶管。

4、 Jinan electric roller shutter door installation and maintenance personnel believe that in the process of testing the safety bottom edge of the stainless steel roller shutter door and using the fast door, if it is found that the electric control box cannot receive the safety bottom edge signal, it is necessary to check the battery in the safety bottom edge transmitter and the bottom edge pressure hose, and replace the battery if it is found that the battery is exhausted. If the bottom pressure hose is damaged or leaked, it shall be sealed. If necessary, it shall be replaced with a new safety bottom pressure hose.

以上就是问题解答的相关内容了，希望能够帮助到大家，如对这一问题还存在任何疑问，都欢迎关注我们网站http://www.jnyuqilin.com并咨询我们的工作人员，将竭诚为您服务。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.jnyuqilin.com And consult our staff, will serve you wholeheartedly.