用做减法的方式排除电动卷帘门使用问题
想要在日常生活中,使用卷帘门毫无障碍,那就需要我们知道怎样的方法来排除电动卷帘门使用期间出现的问题,下面来简单讲解一番吧。
If we want to use the rolling shutter door without obstacles in our daily life, we need to know how to eliminate the problems during the use of the electric rolling shutter door. Let's briefly explain it below.
如何调卷帘门的“行程”
How to adjust the "stroke" of the rolling curtain door
先根据安装说明书上的说明,输入初始密码,进入“设置”,再进入“行程设置”,然后再根据自己的需求进行调整。
First enter the initial password according to the instructions on the installation manual, enter "setting", then enter "travel setting", and then adjust according to your own needs.
内部线路如何检修
How to repair the internal circuit
打开帘布右侧的“控制箱”进行检查。
Open the "control box" on the right side of the cord fabric for inspection.
卷帘门会突然自己打开
The rolling shutter door will suddenly open by itself
可能该电动移门安装了雷达感应器。雷达碰到感应物,就自动打开了。建议夜间不使用卷帘门的情况下,建议是锁死,并切断电源。
Maybe the electric sliding door is equipped with a radar sensor. The radar automatically turns on when it encounters an inductor. It is recommended to lock the shutter door and cut off the power supply when it is not used at night.
卷帘门能不能改成手动控制
Can the rolling shutter door be changed to manual control
可以的。在控制箱进行设置,通过按键进入“行程”,进行“模式设置”,然后选择“手动模式”。
tolerable. Set in the control box, press the key to enter "travel", carry out "mode setting", and then select "manual mode".
调试过程中一定要注意安全
Pay attention to safety during commissioning
卷帘门为何点一下动一下
Why do you click the roller shutter door
通常是因为模式设置为“点动”模式了,可以重新进入行程设置,对模式进行修改。修改为“手动”或者“自动”。
Usually, because the mode is set to "jog" mode, you can re-enter the travel setting and modify the mode. Change to "manual" or "automatic".
电动卷帘门无法向上
The electric roller shutter door cannot be upward
排除电机问题,通常考虑控制键坏了,需要打开控键盒面板,进行检修。
To eliminate the motor problem, it is usually considered that the control key is broken and the panel of the control key box needs to be opened for maintenance.
卷帘一边高一边低
The roller shutter is high on one side and low on the other
排除安装时没装好的可能,或者有硬物阻塞。需要检查一下卷帘行进的通道。
Eliminate the possibility that it is not installed properly during installation, or there are hard objects blocking it. We need to check the passage of the roller shutter.
What are the installation and maintenance items of Jinan electric roller shutter door
电动卷帘门主要是要防撞柱断裂,帘布卡死下不来,内外压差太大运行不畅,滚筒脱焊,控制器不灵等。
The electric roller shutter door is mainly to break the anti-collision column, the cord fabric is stuck, the internal and external pressure difference is too large, the operation is not smooth, the roller is desoldered, the controller is not working, etc.
产品使用日常/安装维护:
Daily use / installation and maintenance of products:
1.按用户使用需要:定期检查控制箱吊装螺丝有无松脱,内箱接线柱有无松脱,电线与电源线有无老化现象;
1. According to the user's needs: regularly check whether the lifting screws of the control box are loose, whether the terminal of the inner box is loose, and whether the wires and power lines are aging;
2.定期为减速机添加润滑油,更换机油;
2. Regularly add lubricating oil to the reducer and change the engine oil;
3.定期擦洗帘布,保持干净清洁。
3. Wipe the cord fabric regularly to keep it clean.
The above is all about the problems and precautions introduced to you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.jnyuqilin.com , our staff will contact you in time.