您好,欢迎访问济南爱国门窗加工部 的网站!
客户服务热线:13296405222

地址:济南市天桥区天桥东街后陈家楼31号

联系我们
济南爱国门窗加工部

联系人:孟经理

联系电话:13296405222

网址:http://www.jnyuqilin.com

地址:济南市天桥区天桥东街后陈家楼31号

当前位置: 首页 > 新闻资讯 > 行业新闻

关于电动卷帘门怎么调限位?大家一起来了解下吧

来源:http://www.jnyuqilin.com/  发布时间:2021-08-10 14:53:47

现在特别多的物品在局限性上都已经有了突破,很多一些之前大家觉得笨重的物品现在都也是慢慢的有了改观,而这一切也主要是因为科技的不断进步,店铺在关门后大家应该都会见到一扇大铁门从上而下的进行关闭,这个也就是卷帘门,而现在电动卷帘门也已经出现了,那么电动卷帘门怎么调限位?电动卷帘门故障怎么办?
At present, many items have made breakthroughs in their limitations. Many items that used to be bulky have slowly changed. All this is mainly due to the continuous progress of science and technology. After the store is closed, everyone should see a large iron door closed from top to bottom, that is, the rolling shutter door, Now the electric rolling shutter door has also appeared, so how to adjust the limit of the electric rolling shutter door? What about the failure of electric rolling shutter door?
电动卷帘门怎么调限位?
How to adjust the limit of electric rolling shutter door?
用手拉动环形链条使门帘离地面1米左右,先试“上”、“停”、“下”按键,观察门升、停、降各功能是否灵敏可靠,若正常,即可将门帘上升或下降到确定的位置。
Pull the ring chain by hand to make the door curtain about 1m above the ground. First try the "up", "stop" and "down" buttons to observe whether the door lifting, stopping and lowering functions are sensitive and reliable. If they are normal, the door curtain can be raised or lowered to the determined position.
1、将限位器上的螺母卡片拨动适当的角度以脱开限位螺母,或是松开限位器上的锁紧螺钉。
1. Move the nut card on the stopper at an appropriate angle to disengage the stopper nut, or loosen the locking screw on the stopper.
2、把门开到合适的位置后,旋转限位器上的限位螺母使其压住开门限位开关上的滚轮,听到“滴达“声后,把螺母卡片卡入限位螺母的相应槽中或是旋紧螺钉。
2. After opening the door to a proper position, rotate the limit nut on the limiter to press the roller on the door opening limit switch. After hearing the "drip" sound, clip the nut card into the corresponding groove of the limit nut or tightn the screw.
3、把门关到合适的位置后,襄阳|理想门业提示旋动限位器上的限位螺母使其压住关门限位开关上的滚轮,听到“滴达“声后,把螺母卡片卡入限位螺母的相应槽中或是旋紧螺钉。
3. After closing the door to the appropriate position, Xiangyang ideal door industry prompts to rotate the limit nut on the limiter to press the roller on the closing limit switch. After hearing the "drop" sound, clip the nut card into the corresponding slot of the limit nut or tighten the screw.
4、若开关门位置不合适,可重新进行调整,以达到最佳位置。
4. If the opening and closing position is inappropriate, it can be adjusted again to achieve the best position.
以上的精彩内容来自: 济南电动卷帘门安装维修提供分享,更多的精彩内容请点击进入我们的网站:http://www.jnyuqilin.com,我们会有更多的精彩内容等您查看
The above highlights come from: Jinan electric rolling shutter door installation and maintenance to share. For more highlights, please click to enter our website: http://www.jnyuqilin.com , we will have more wonderful content for you to see